The 44th TOKYO MOTOR SHOW 2015

MENU

SHOW GUIDE

Parts, Machinery and Tools (East Halls)

ZF Friedrichshafen AG

Booth No.E1001

Exhibit Name WP / JP Category New Function / Feature Photo
Advanced Urban Vehicle   Reference exhibits Advanced Urban Vehicle, the entire in-house concept vehicle, shows excellent maneuverability in urban traffic with innovative front-axle concept and electric motors mounted close to the wheel. Semi-automated assistance functions enhance comfort/convenience, safety, and efficiency. Smart Parking Assist maneuvers the vehicle into virtually any small parking space – remote-controlled by mobile devices such as a smartphone or smartwatch. The hands-on detection function covers the entire steering wheel and thus forms the basis for assistance and automated driving functions. An OLED display in the driver's direct field of view provides the driver with additional information.  

Öhlins Racing AB

Booth No.E1002

Exhibit Name WP / JP Category New Function / Feature Photo
OHLINS   Others  

Exedy Corp.

Booth No.E1004

Exhibit Name WP / JP Category New Function / Feature Photo
Torque Converter   Currently available  
Clutch Cover   Currently available  
Clutch Disc   Currently available  
2 Mass Flywheel   Currently available  
Flywheel Damper   Currently available  
MotoGP Clutch   Reference exhibits  
Motorcycle Clutch   Currently available  

Kyowa Kogyo Co., Ltd.

Booth No.E1005

Exhibit Name WP / JP Category New Function / Feature Photo
STEERING JOINT,UNIVERSAL JOINT,FREE SLIDING SHAFT   Currently available 【In technology innovation,evolution to the next generation of free sliding syafts】

KYOWA,which had developed the cold forged steering joint for the first time in Japan in 1977, has achieved the next generation of free sliding shafts by mixing the resin thin film coating technology that utilizes a new idea to our unique cold forging technology.
We realize a specification which is required for steering joints such as ''lightweight and compact'',''high-performance and high-durability'',''cost reduction''.

Yorozu Corp.

Booth No.E2007

Exhibit Name WP / JP Category New Function / Feature Photo
  Currently available  

NHK Spring Co., Ltd.

Booth No.E2008

Exhibit Name WP / JP Category New Function / Feature Photo
Automotive suspension springs   Others ・Coil Springs=These springs provide comfortability by absorbing vibration and impact coming through from road.
・Leaf Springs=Flat springs, loaded on the commercial vehicles mainly, provides higher ride quality and steering stability.
・Stabilizer Bars=Products used for controlling tilt of a car and stabilizing its steering. Horrow type weighs 20-50% less than Solid type.

Akebono Brake Industry Co., Ltd.

Booth No.E2009

Exhibit Name WP / JP Category New Function / Feature Photo
WP Reference exhibits  

NSK Ltd.

Booth No.E2101

Exhibit Name WP / JP Category New Function / Feature Photo
e-motion modules WP Reference exhibits What’s this? It seems to be a demo car, doesn’t it? But oddly, there are only a few parts. This is the impression you might have. In fact, this exhibit shows NSK’s vision of the environmentally friendly and safe cars of the future.
Advanced Assist Steering II, Wheel Hub Motors, Ball Screw for Electric Brake Booster, and a New EV Drive System… Using an innovative technique combining narration and images on a transparent monitor, we will introduce the e-motion modules—made up entirely of original NSK technologies—making would could be complicated, simple, fun and easy to understand.
Advanced Assist Steering 2 WP Reference exhibits This system automatically steers the vehicle when there is imminent danger of a collision. It has two key features.
First, when driver braking and steering are not going to be enough to avoid a collision, such as when a person or vehicle suddenly rushes out in front of the car, the system quickly senses the danger and automatically makes an appropriate maneuver to avoid the collision. Further, it quickly brings the unstable movement after avoiding the collision back into a stable driving condition.
Second, when the tires move suddenly, for instance when avoiding a collision, the safety steering mechanism restrains steering wheel movement to prevent the driver from accidentally making unsafe steering moves. We believe that these technologies will become indispensable for ensuring vehicle safety.
Wheel Hub Motor   Reference exhibits Mounting a drive motor into the wheels of an automobile creates several advantages that turn common sense about cars on its head. For instance, the engine, transmission, and axles that transmit power to the tires, all of which take up a lot of space, would no longer be needed. That would enable spacious, free designs of car interiors and the trunk.
Furthermore, the function of a transmission can even be built into each wheel by using NSK’s proprietary technology for twin motors. Even two small motors can enable a vehicle to be propelled powerfully at times, and quickly at other times.
Since the wheels can be quickly controlled individually, this technology is also practical for collision avoidance and self-driving vehicles. Indeed, it is grabbing the spotlight for increasing structural freedom and offering the potential for advances in safety and motion performance.
Ball Screw for Electric Brake Booster   Currently available Electric Brake Booster that motorize the brake system are essential in eco-cars. This booster contains a regenerative braking system that recovers energy produced during deceleration and sends it to the battery so that no energy is wasted.
Going forward, there is demand for a feature that can quickly produce the large amount of energy needed to operate an automatic braking system for avoiding collisions, in preparation for the coming age of self-driving vehicles.
NSK is the first in the world to successfully mass-produce a ball screw for electric-powered brake boosters. Since the functions of braking systems are expected to continue advancing in the future, NSK, too, is pursuing ever-higher quality.
NSK’s supremely smooth ball screws will contribute to improved fuel efficiency and greater safety.
New EV Drive System   Reference exhibits While electric vehicles have already started to become common, there is still a need for further technological innovation.
Increasing the driving distance by reducing power consumption will be the keys to the future evolution of EVs, which rely on electricity for everything. A solution to this issue that NSK is currently developing is a traction reducer that transmits power without using gears. It transmits power with a roller via special oil that gets hard only the instant it is compressed. Since a traction reducer transmits power through “rolling,” it is characterized by outstanding quietness, regardless of rotation speed and torque. The combination of this revolutionary traction reducer with a high-speed motor will enable further reductions in the size and weight of EV drive systems overall. It will help reduce power consumption in EVs.
 
Low Friction Hub Unit Bearing   Currently available  
High Reliability Hub Unit Bearing   Currently available  
Super Long Life Planetary Shaft   Reference exhibits  
Extremely High Speed Planetary Needle Bearing   Reference exhibits  
Thin Thrust Needle Bearing for Planetary Gear Side WP Reference exhibits Use of the world’s smallest rollers (diameter of 1 mm × 1.8 mm length, for planetary gears) means the measurements of peripheral components can remain unchanged as much as possible and enables replacement from the washer. We reduced the bearing torque by at least 70% compared to the washer. We also reduced the weight by about 50% by using plastic cages.
Tappet Roller for Diesel Engines   Reference exhibits  
Stainless Bearing for Hydrogen Circulation Pump WP Currently available We achieved longer service life, greater durability, and better hydrogen resistance than the conventional stainless steel (SUS440C) by using NSK’s proprietary stainless steel ES1.
High Reliability Seal Bearing for Electric Water Pump WP Currently available We improved the seal performance by using three lips instead of the traditional two lips. Also, by using a seal material with coolant durability, we achieved at least five times greater water resistance than conventional seals.
Transmission Torque Sensor Unit   Reference exhibits This is a torque sensor unit for transmissions that can precisely measure engine torque (power) in real time. It can measure the torque input to the transmission in real time by converting the loaded torque into displacement of two members and detecting that displacement with an encoder. This enables constant maintenance of optimal gear shift control, which will contribute to fuel savings and enhanced comfort in automobiles.  
Friction Plate with Low Drag Torque (ν malti segment)   Reference exhibits This is a clutch and friction plate used in automatic transmissions. When the clutch and friction plate idle in oil, they agitate the oil, which is one of the causes of poor fuel economy. So, we redesigned the groove of the clutch to control the behavior of the oil and air, thereby improving the fuel economy.  
Functional Safety Compliant Column EPS   Currently available  

NTN Corp.

Booth No.E2103

Exhibit Name WP / JP Category New Function / Feature Photo
Two Motor on-board Drive System WP Others ・Independent control of the left and right wheel drive power improves the vehicle's driving performance.
・Drive system consisting of hub bearings and driveshafts available as module products.
 
Mechanical Clutch Unit for Next Generation Steering   Others  
WP Reference exhibits  
Auto tensioner with the variable damper mechanism for ISG-equipped engine WP Others  
Advanced Driveshaft Module WP Others  
Light Weight Drive Shaft for FR vehicle WP Others  

Alpine Electronics, Inc.

Booth No.E2104

Exhibit Name WP / JP Category New Function / Feature Photo
“Alpine Style Premium Space Design”   Currently available Along with genuine Alpine products, an MC and video presentation will introduce the “Alpine Style Premium Space Design” concept aimed at enhancing the joy of driving through Vehicle-specific navigation, rearview, audio and other equipment.
Experience the world’s first 10-inch WXGA LCD high-definition screen on our demo board featuring products for actual consoles from six different car models, the stunningly beautiful Big X Premium EX10 Series designed for the Alphard/Vellfire, and the Voxy ZS KIRAMEKI , Odyssey, N-BOX Custom and Serena models.

Sonic Design Co., Ltd. 

Booth No.E2106

Exhibit Name WP / JP Category New Function / Feature Photo
SonicPLUS THE CREST for Mercedes-Benz S-Class (222) Double Crest   Currently available SonicPLUS THE CREST is the revolutionary Pure HiFi car speaker that solve long installation term and cost, unsure installation result. Sonic Design develop and produce speaker module intensively, and realize the dream that install the real Hi-End speaker with bolt-on and plugged-in only.
Exclusive speaker package for SUBARU Legacy B4 and Outback WP Reference exhibits  

Fuji Kiko Co., Ltd.

Booth No.E2107

Exhibit Name WP / JP Category New Function / Feature Photo
Cockpit Display #1   Reference exhibits 1) Automatic adjustment to the best driving position provides comfort and safety.
2) Smooth adjustment of steering and seat position fits to the driver’s satisfaction. 3)Shifter with illumination creates enjoyable visual.
 
Cockpit Display #2   Reference exhibits 1) Dial-Shift-by-Wire shifter with interlock which contains ECU (Electronic Control Unit) realize comfortable shift changing.
2) Automatic position change of Steering Column and Seat ensures comfortable space in boarding and alighting.
 
High Collision Energy Absorption Capability Steering Column   Reference exhibits 1)Considerable safety improvement was achieved by high collision enegy absorption performance.  
Steering Column for Mega Trucks   Reference exhibits 1) Wide adjustment range ensures comfortable space for driver and passengers.
2) Pedal switch and gas damper provide more safety and reliable operation.
 
Rear Seat Arrange Frame   Reference exhibits 1) Thinner seat recliner enables variety of seat design layout.
2) Only one action realizes auto neutral position return and allowes easy seat angle adjustment.
 
Thinner Round-type Recliners Series ( Step / Seemless , Manual / Power )   Reference exhibits 1) Thinner recliner enables high improvement of seat back twist values.
2) Same size recliner realizes commonization of Manual and Power seat frame.
 
Super thinner A/T Shifter   Reference exhibits 1)Thinner and lighter Shifter with new mechanism layout give driver comfortable space.  
Lever type Shifter with Shift-by-Wire (ShBW)   Reference exhibits 1)Compact and lighter A/T Shifter by using ECU ( Electronic Control Unit ).
2) Two types : Assembled on Steering Column or Instrumental Panel.
 

Aisin Takaoka Co., Ltd.

Booth No.E2201b

Exhibit Name WP / JP Category New Function / Feature Photo
HOT END MODULE for DIESEL ENGINE   Currently available COMPACT EXHAUST AFTERTREATMENT SYSTEM TO BE SATISFIED EUROⅥ REGULATION BY GAS FLOW OPTIMIZATION USING CASTED DIFFUSER AND TANDEM-ARRANGING OF CATALYST
Lightweight Door Impact Beam   Currently available To contribute the light weight of vehicles, provide products which has high geometrical accuracy and ultra high tensile strength (1,500MPa) produced by die quench process that forming and quenching simultaneously the heated steel thin sheet in the die.  

Aisin AI Co., Ltd.

Booth No.E2201e

Exhibit Name WP / JP Category New Function / Feature Photo
6 speed transverse manual gearbox for high torque application   Currently available Achieved world top class light and comfortable shift feeling by improving the smoothness of shifting.
Achieved world top class low vibration and low noise level by changing the gear machining method and by the optimized design of transmission case utilizing CAE analysis.

Advics Co., Ltd.

Booth No.E2201f

Exhibit Name WP / JP Category New Function / Feature Photo
Electronically Controlled Brake System WP Reference exhibits  
Cooperative Regenerative Brake System (ESC modulator type)   Currently available ・Regenerative effectiveness is as good as brake by wire system
・Gear pump enables quiet ESC apply for natural cooperative regenerative brake control
 
Electric Parking Brake   Currently available ・Simple switching is sufficient to ensure reliable operation of parking brake
・Driver's burden is reduced by automated parking brake linked with the operation of accelerator pedal, etc.
 
Aluminum mono-block opposed caliper   Currently available ・Lightweight and high rigidity
・Excellent NVH performance
・Low drag torque
 

JTEKT Corp.

Booth No.E2202

Exhibit Name WP / JP Category New Function / Feature Photo
JTEKT DRIVING SIMULATOR SODA WP Reference exhibits SODA simulate the vehicle in the past, present and future, and you can experience the improvement of steering sysetem technology.
We intorduce these technoligy
<Past> The Confort efforted by power steering system.
<Present> The Safety worked by Lane Keep Assist technology.
<Future> The Safety and Confort efforted by JTEKT's technology in the autodrive.

Arrk Corp.

Booth No.E2203a

Exhibit Name WP / JP Category New Function / Feature Photo
  Reference exhibits
  Reference exhibits

Asteer Co., Ltd.

Booth No.E2203b

Exhibit Name WP / JP Category New Function / Feature Photo
CAPLESS FILLER PIPE   Others
Smart Hot Press BodyParts   Others
  Others  
FUEL non-RETURN VALVE   Others  
CROSS CAR BEAM   Currently available

Maruko Keihoki Co., Ltd.

Booth No.E2203f

Exhibit Name WP / JP Category New Function / Feature Photo
trial listening machine of automobile horns   Others  

YP System Co., Ltd.

Booth No.E2203i

Exhibit Name WP / JP Category New Function / Feature Photo
SHOBO RESCUE and NEW PRODUCTS JP Currently available

Omron Automotive Electronics Co., Ltd.

Booth No.E3011

Exhibit Name WP / JP Category New Function / Feature Photo
  Reference exhibits  
WP Reference exhibits  
  Reference exhibits  
  Reference exhibits  
  Reference exhibits  
  Reference exhibits  
  Reference exhibits  
  Reference exhibits  
  Reference exhibits  
  Reference exhibits  
  Reference exhibits  
  Reference exhibits  
  Reference exhibits  

Jatco Ltd.

Booth No.E3012

Exhibit Name WP / JP Category New Function / Feature Photo
Jatco CVT7 W/R WP Currently available  
Jatco CVT7   Currently available  
Jatco CVT8   Currently available  
Jatco CVT8 HYBRID   Currently available  
Transmission for RWD Hybrid vehicles   Currently available  
CVT Virtual Driving   Others  
Principles of operational CVT model   Others  

Stanley Electric Co., Ltd.

Booth No.E4001

Exhibit Name WP / JP Category New Function / Feature Photo
  Others

Toyota Industries Corp.

Booth No.E4101

Exhibit Name WP / JP Category New Function / Feature Photo
Car Air-Conditioning Electric Compressor ESB20 for Toyota new Prius WP Currently available A car air-conditioner is essential for driving in comfort. Toyota Industries holds the no.1 share of compressors for car air-conditioners in the world.
DC-DC Converter for Toyota new Prius WP Currently available The DC-DC Converter converts the high voltage of the HV battery to 14V, and supplies power to light, wipers, and other on-board equipment.
Rear Inverter for Toyota new Prius WP Currently available Used for Prius’ first 4WD model, the Rear Inverter plays an important role by supplying power to the rear motor, which drives the rear wheels.
AC Inverter for Toyota new Prius WP Currently available The AC Inverter converts DC voltage from the battery to AC voltage for household use, and enables various household appliances to be used in inside the vehicle.
GD engine (Equipped with Toyota Land Cruiser Prado)   Currently available  
Variable nozzle turbocharger for GD engines   Currently available  
Plastic rear window and quarter window for Toyota GRMN86 Prototype   Currently available  
Plastic front door window for Toyota i-Road   Currently available  
VD engine (Equipped with Toyota Land Cruiser 200 for Overseas Markets)   Currently available  
Air Compressor for Toyota FCV MIRAI   Currently available  
Hydrogen Circulation Pump for Toyota FCV MIRAI   Currently available  
Inverter of Hydrogen Circulation Pump for Toyota FCV MIRAI   Currently available  
Multi-Car Charging Stands for PHVs and EVs   Reference exhibits  
On-Board Charger for Toyota Prius PHV   Currently available  
Fixed Displacement Compressor 10SRE13   Currently available  
Scroll type Fixed Displacement Compressor SCSE06   Currently available  
Variable Displacement Compressor 6SES14   Currently available  
Electric Compressor ESA27   Currently available  
Multi Functional Plastic Roof   Reference exhibits  
Plastic Panoramic Roof for Toyota Prius α   Currently available  

NGK Spark Plug Co., Ltd.

Booth No.E4102

Exhibit Name WP / JP Category New Function / Feature Photo
High-ignitability Spark Plug for High Boosted Engines   Currently available This high-ignitability spark plug developed for high boosted downsized engine contributes to an improvement in fuel efficiency.  
M10 HEX14 Spark Plug with Extra Long Reach   Currently available While maintaining similar performance to the current M14/M12 spark plug, this compact (M10) plug supports a variety of engines - including those with high output and high engine speeds.  
M10 Bi-HEX12 Spark Plug with Extra Long Reach   Reference exhibits While maintaining similar performance to the current M14/M12 spark plug, this compact (M10) plug supports a variety of engines - including those with high output
and high engine speeds.
 
Zirconia Oxygen Sensor OZAS®-S2   Currently available Enables deterioration diagnosis of catalysts and air-fuel ratio control immediately after the engine starts.  
ZFAS®-U2 Wide Range Oxygen Sensor   Currently available Enables precise air-fuel ratio control in all ranges from rich-burn to lean-burn.  
ZFAS®-U2-SM (Controller Integrated in Connector)   Reference exhibits A smart-type wide range sensor with a control circuit embedded in the connector. Performs precise air-fuel ratio control in all ranges from rich-burn to lean-burn. Also capable of detecting the hydrogen concentration in the air intake.  
XCU®-UA ASIC for ZFAS®-U   Currently available Used as an interface between the wide range air-fuel sensor and the Engine Control Unit(ECU).  
Intake Oxygen Sensor ZFAS®-i1   Currently available Enables precise EGR control by detecting oxygen concentration in intake gas and complies with stricter emission control.  
CTAS®-T Wide Range Exhaust Gas Temperature Sensor   Currently available Enables protection of exhaust systems and optimal control of diesel after-treatment systems.  
Non-Resonant Knock Sensor ERAS®-KN   Currently available Used to improve engine performance and fuel efficiency.  
Hydrogen Leak Detection Sensor   Reference exhibits Contributes to safety improvement of the fuel cell system by checking hydrogen leaks, since hydrogen is an easily ignitable gas.  
Decorative Ceramic Parts   Reference exhibits Long-lasting gloss feeling enables superior texture expression.  
NHTC® (New High Temperature Ceramic) Glow Plug   Currently available In order to achieve high temperatures and a long lifespan, this high-performance glow plug uses ceramics (silicon nitride) in the heater area. This results in decreased starting time and reduced emissions.  
Metal Glow Plug for AQGS® (Advanced Quick Glow System)   Currently available The high-performance metal glow plug for AQGS offers improved heating performance compared to conventional metal glow plugs.  
Glow Control Unit   Currently available Appropriate power is supplied to the glow plug at the appropriate time via a conduction order from the ECU.  
Ceramic GIPS® (Glow Function Integrated Pressure Sensor)   Currently available Designed for use in next-generation engines, this integrated combustion pressure sensor and NHTC glow plug (M10) detects abnormal combustion and is effective in reducing emissions.  
ZFAS®-N2 (NOx Sensor)   Currently available This sensor can measure NOx concentration and oxygen concentration in the exhaust gas simultaneously in high-precision.  
High Ignitability Ni Type Spark Plug   Currently available Enables stable ignition with low emissions and high fuel efficiency.  
Zirconia Oxygen Sensor ZFAS®-S4 (Small Heated Type)   Currently available Compact, lightweight heated oxygen sensor used for air-fuel ratio control in two-wheeled vehicles.  
Zirconia Oxygen Sensor OZAS®-S5 (Small Non-heated Type)   Currently available Compact, lightweight, unheated oxygen sensors used for air-fuel ratio control in two-wheeled vehicles.  
Ceramic Bearing Ball   Currently available Used in ultra-precise high-speed bearings, thermal-resistant bearings and semiconductor machinery.  
Ceramic Grades   Currently available A variety of insert grades makes it possible to achieve high efficient machining for various applications.  
SS Tools   Currently available Applicable for various work piece materials and ultra-precision machining of small parts.  
Aluminum Cutter   Currently available High speed milling of up to 20,000 rpm. All cutters have a safety prevention mechanism.  
Ceramic Packages   Currently available Supports to increase and diversify functions of electronic devices.  
Ceramic Heater   Currently available This heater is created by embedding a wire inside alumina ceramics and uniting the parts through sintering.  
SOFC stack   Currently available Among fuel cells, SOFC (solid-oxide fuel cell) has high power generation efficiency and it is expected to achieve miniaturization and cost reduction.  
Oxygen Concentrator   Currently available A very energy efficient and quiet oxygen concentrator.  

Mitsubishi Electric Corp.

Booth No.E4103

Exhibit Name WP / JP Category New Function / Feature Photo
EMIRAI3 xAUTO   Reference exhibits  
EMIRAI3 xDAS   Reference exhibits  
Mobile Mapping System   Reference exhibits  
Intelligent Information Panel + Driver Sensing Unit   Reference exhibits  
Driver Sensing Unit   Reference exhibits  
MultiBonding display   Reference exhibits  
Lighting control module   Reference exhibits  
Long Range Ultrasonic Sensor   Reference exhibits  
Millimeter-wave Radar   Reference exhibits  
Forward Looking Camera   Reference exhibits  
ADAS-ECU   Reference exhibits  
C2X Communication Unit   Reference exhibits  
High Precision Locator   Reference exhibits  
Infrared Camera   Reference exhibits  
Ultrasonic sensor and ECU   Reference exhibits  
Surround Viewing Camera   Reference exhibits  
3D Head-UP Display   Reference exhibits  
DIATONE SOUND. NAVI   Currently available  
ETC2.0   Currently available  
DIATONE SPEAKER   Currently available  
Inverter for electric vehicles   Currently available  
Wireless charging and discharging unit   Reference exhibits  
Inverter   Currently available  
Motor   Currently available  
Alternator   Currently available  
Starter   Currently available  
Starter   Currently available  
Motor Generator   Currently available  
Gasoline Engine Control Unit   Currently available  
Revolution Sensor   Currently available  
Air-flow Sensor   Currently available  
Intake-air Temperature Sensor integrated Pressure Sensor   Currently available  
Injector(CS)   Currently available  
Injector(EV14)   Currently available  
Ignition Coil (Ion current detection function)   Currently available  
Transmission Control Unit   Currently available  
Electric Oil Pump   Currently available  
Motor Module Shift-by-wire System   Currently available  
Brushless Motor Controller Unit   Currently available  
Fuel Pump Module   Currently available  
On-board Charger   Currently available  
EGR Valve   Currently available  
Turbo Actuator   Currently available  

DENSO CORPORATION

Booth No.E4201a

Exhibit Name WP / JP Category New Function / Feature Photo
Harmonious Communication Cockpit JP Reference exhibits Future Driving (HMI) Interactive Cockpit
DENSO Environment Technologies (Integrated Efficiency) JP Reference exhibits 4 main pillars of environment technologies R&D will be introduced through Augumented Reality motion pictures.
Gasoline Engine Management System   Reference exhibits  
Diesel Engine Management System   Reference exhibits  
Products for EV/HEV   Reference exhibits
SiC Power Device   Reference exhibits  
Products for FCV   Reference exhibits  
Stop/Start System   Reference exhibits
DC Normal Charger   Reference exhibits  
V2H(Vehicle to Home) Charging/Discharging System   Reference exhibits  
Fail-Safe EPS JP Reference exhibits
Surround Video Sensing System JP Reference exhibits  
Advanced Driving Support System   Reference exhibits
Active Safety Systems & V2X   Reference exhibits
Main Products for New PRIUS WP Reference exhibits  
Products of Aftermarket   Currently available  

Anden Co., Ltd.

Booth No.E4201c

Exhibit Name WP / JP Category New Function / Feature Photo
Plug-in Relay Series   Currently available ANDEN provides a wide range of ISO, SAE-certified plug-in relays.
Using high conductive metals and high efficiency magnetic circuit, it features
low heat generation and power saving. And also durability performance is
improved due to the ANDEN unique auto contact pressure adjustment
technology.
 
Power PCB Relays   Currently available ANDEN has created the smallest high current capacity PCB relays in its class,
which can replace a 20A plug- in relay. The power PCB relay is available in two
models with a different value of coil resistance to meet different requirements
for low heat generation and power-saving. This series enable the creation of
smaller and higher density packaging assemblies including junction boxes.
 
Vehicle Approaching Alert System   Currently available For quieter vehicles such as HEV/EV, when traveling at low speed by motor,
this system generates the artificial motor running sound to inform the vehicle
approaching or presence to pedestrian.
During the vehicle traveling under approx.25km/h or reverse traveling,
this system generates the sound automatically to alert pedestrians the
vehicle approaching.
 
Intelligent Relay   Currently available Intelligent relay which has body system funtions such as the door-lock and the
wiper can be used with the sense of a relay in compact package.
Flexibility and low cost are realized by new multipurpose customized IC with
various functions,and mass production by automatic line.
 
Buzzer   Currently available ANDEN offers a variety of vehicle interior buzzers and exterior waterproof buzzers for many applications. With a high - performance piezoelectric vibrator,in spite of its small and light package,they produce different beeps and volumes suited for their usage.  
High voltage Relay Series   Currently available ANDEN provides High voltage relays for HEV/EV. They features safety for flammable gas and current-breaking performance by unsealed structure.
And also we achieved 54%-volume reduction compared to the conventional type.
 
Relay Module   Currently available ANDEN provides 10 channel mechanical relay module which integrated fuses and 20A class relays. This module contributes to downsizing of relay box and reduction of vehicle wiring harnesses.
Internal relays in the module were exclusively designed and achieved power saving,low heat generation and cost reduction.
 

Hitachi Automotive Systems, Ltd.

Booth No.E4202

Exhibit Name WP / JP Category New Function / Feature Photo
Advanced Driver Assistance System   Others  
Chassis Control Systems   Others  
Electric Powertrain Systems   Others  
Engine Powertrain System   Others  

NOK Corp.

Booth No.E5003

Exhibit Name WP / JP Category New Function / Feature Photo
oilseal   Currently available

Sumitomo Riko Co., Ltd.

Booth No.E5004

Exhibit Name WP / JP Category New Function / Feature Photo
Weight reduction of AVS products   Currently available Achieved the weight saving by optimized design based on the analysis technology as a longtime leading AVS supplier. Contribute to environmentally-friendly vehicle improving the fuel efficiency and CO2 emission.
Plastic Filler Neck Module   Reference exhibits Modularization of plastic lines.
Light weight, high corrosion resistance and low permeability.
High flexibility.
 
Soft Engine Cover   Reference exhibits Engine design cover composed of light and high rigidity urethane foam.
40% weight saving by removal of resin cover.
Reduce engine noise and pedestrian head damage at the same time.
 
Ultra Light Headrest   Reference exhibits 40% of mass reduction urethane materials are developed by our original combination design technology.
The mass and cost of headrest can be reduced by using our own material.
 
SmartRubber for occupants monitoring   Reference exhibits Flexible sensor made from our new developed rubber.
It can measure occupant’s seating pressure distribution and heartbeat without consciousness by equipped in the seat.

Sumitomo Electric Industries, Ltd.

Booth No.E5005

Exhibit Name WP / JP Category New Function / Feature Photo
Battery Wiring Module   Others The module enables stable electric contacts to battery cells and high isolation to other circuits with high workability.  
DC/DC Convertor   Others In Kinetic Energy-Recovery System, the convertor adjusts voltages of a battery, a generator, etc. for stable behavior. Sumitomo's unique high heat radiation board enables a compact and high efficient convertor.  
Aluminium Wiring Harness   Others Material of wires are changed from Cu to Al, due to smaller specific gravity of Al, to enable significant lightweight and improve fuel efficiency.  
Advanced Infrared Beacon   Others The beacon provides traffic information to vehicles to pass through it and works as a detector, simultaneously.  
Next Generation Central Gateway   Reference exhibits Sumitomo developed the gateway, which has security functions, applicable to multi-protocol of ADAS and autonomous drive.  
Automotive High Speed LAN   Reference exhibits Automotive wire harness for high speed communication is developed to make it possible to transfer huge data without delay corresponding to evolution of ADAS.
 
Push and Smart Entry Integrated BCM   Others This product manages behavior of equipment and integrate smart entry system which enables key less operations to save space.  
Automotive Connectors   Others High Frequency Connector: Connectors for co-axial cables which are suitable to sensors and automotive multimedia equipment such as GPS, TV and VICS.
Printed Circuit Board Connector: The connectors are put on PCB, suitable to join wires to ECUs.
 

Koito Mfg. Co., Ltd.

Booth No.E5006

Exhibit Name WP / JP Category New Function / Feature Photo
Next-Generation Concept Model   Reference exhibits In the forthcoming automatic operation society, next-generation lighting created by KOITO’s lighting technology will bring safety, reliance and comfort.
In addition to properly ‘illuminating’ lanes, road condition, pedestrians and traffic signs, KOITO proposes a lighting which ‘expresses’ vehicle condition to pedestrians as a means of communication.
 
LED Headlamp   Currently available KOITO's unique optics control system and optimized lighting system realized LED headlamps with world-leading brightness and power-saving performance. LED headlamps are widely adopted to hybrid and electric vehicles and also to mini vehicles and motorcycles.  
LED Rear Combination Lamp   Currently available By using LEDs as the light source, LED rear combination lamp offers higher power efficiency, longer life, and better space-saving than the conventional incandescent-type lamps. The LED rear combination lamp improves safety for the following vehicles, increases fuel efficiency, and also enables innovative lamp designs.  
Adaptive Driving Beam Headlamp   Currently available The Adaptive Driving Beam (ADB) is a headlamp system that offers the optimal visibility for safer driving by improving the driver's forward vision with the help of the installed camera that recognizes vehicles driving ahead. The headlamp lighting is controlled automatically to increase visibility while minimizing glare to preceding and oncoming traffic.  
LED Lamps for Accessories   Currently available By leveraging LED lamp technology for four-wheeled vehicle and motorcycle, KOITO is also commercializing accessory lamp for buses and trucks, etc.  
Domestic and Global Products   Currently available KOITO Group operates globally in 10 countries.
Under R&D, production, and sales conducted in 5 major regions (Japan, North America, Europe, China and Asia), KOITO is making efforts to transfer technologies to group companies, and to establish complementary supply structure among them. At the same time, KOITO aggressively develop a variety of products which match the market needs, including high-value products (such as LED headlamps and Adaptive Driving Beam headlamps) and products for low-priced vehicles in emerging countries.
 

Yazaki Corp.

Booth No.E5007

Exhibit Name WP / JP Category New Function / Feature Photo
CONNECTING CAR COMPONENTS   Currently available Junction block for high voltage, Aluminum wire, Automotive optical component, Sliding door permanent power supply system, etc.  
CONNECTING CARS with PEOPLE   Reference exhibits Small Package Large Viewable Area Head-up Display, High-grade analog meter, etc.  
CONNECTING CARS with LIFE   Currently available iesta AC EV Charger, Hybrid Digital Tacograph DTG7, etc.  

Kuzeh Corp.

Booth No.E5104

Exhibit Name WP / JP Category New Function / Feature Photo
THERMOSTAT, THERMO VALVE, MANIFOLD THERMOSTAT, THERMO ELEMENT, THERMO ACTUATOR   Reference exhibits  

Keihin Corp.

Booth No.E5105

Exhibit Name WP / JP Category New Function / Feature Photo
WP Others  

Schaeffler AG

Booth No.E5106

Exhibit Name WP / JP Category New Function / Feature Photo
Glass Car/Best of Schaeffler   Reference exhibits Glass car shows you Schaeffler's technology in power train, systems to the last details; for Engine, electric variable valve timing system, uniair, BAS decoupling tensioner etc, for transmission, CVT chain, centrifugal pendulum, for chassis, electric roll stabilizer, vehicle level adjust actuater, for e-Mobility, elextric axle, hybrid module. The big touch panel allows you to check each technologies interactively.
Formula E Show Car   Reference exhibits Formula E Show car, Schaeffler sponsors ABT Schaeffler Audi Sports the second season as well. ABT and Schaeffler have developed the entire powertrain.
Engine: BMW   Reference exhibits BMW's latest turbo engine cut model. Schaeffler's technologies, such as hydraulic lash adjuster, rolloer finger follower, which fully use Schaeffler's precision press processing technology, and variable valve timing system.  
MDD + DQ231 with centrifugal pendulum   Reference exhibits Wet type dual clutch + centrifugal pendulum absorber and dry type modular design dual clutch unit cut model To improve the fuel efficiency, the engine has been down-sizing, however, it also caused the increase of rotational fluctuation. Schaeffler's centrifugal pendulum is effective to lower the vibration and noise.  
Hybrid module - High-voltage standard module   Reference exhibits Clutch integrated Hybrid mofule. To reduce the axial size by disconnected cluch is placed in the rotor of motor. It was enabled downsizing of disconnected clutch by install one way clutch in case of engine torque is high.  
Electric Axle Drive HV Gen.3 - Coaxial Design   Reference exhibits Electric axle. Modular structure constituded by drive unit, a transmission unit and electromechanical torque vectoring unit, possible to adopt variety development requirement. Provide the maximum torque difference between the torque vectoring even at full traction by seperated the torque vectoring motor and the drive motor. Increased driving dynamics for hybrid and electric vehicles  
Active roll stabilizer 48V   Reference exhibits Active roll stabilizer cut model. It's for 48V against 12V which is the exhibited glass car, adapted in BMW's latest 7 series. It contributes in vehicle's driving safety. Schaeffler's new product.  

MAHLE GmbH

Booth No.E5107

Exhibit Name WP / JP Category New Function / Feature Photo
Piston   Currently available Gasoline and diesel pistons  
Bearings   Currently available F1/F2 aluminum bimetal bearing with polymer coating; S10 graded lead-free sputter coating on bronze; Flexi-flang bearing  
Camshaft in closed cam carrier (C³) JP Reference exhibits MAHLE camshafts can be assembled into a cam carrier providing a one-piece module ready for assembly on the engine; No grinding of camshaft necessary after assembly (MAHLE process advantage)
 
Assembled camshaft   Currently available Low Friction Camshaft (LFC) and CamInCam  
Valve   Currently available Full stem valve, EvoTherm, TopTherm valves  
Air intake module with integrated indirect charge air cooler   Currently available High volumetric efficiency and efficient air flow routing; Modular air duct after throttle body for various applications
 
Cylinder head cover JP Currently available Cylinder head cover with integrated pressure regulation (PCV valve), interface for valve train actuator, high pressure pump, and cam angle sensors; Hot-gas-welding process to reduce residual dirt
 
Air cleaner module JP Currently available Air cleaner module with integrated engine cover for a vehicle platform
 
Oil pump   Currently available Patented pendulum-slider oil pump combined with vacuum pump; The well-proven and innovative pendulum-slider principle is not only suitable for engine oil pumps, but also for other applications (e.g. transmission) as well as in combination with other pumps
 
Oil pan   Currently available Plastic oil pan with integrated baffle, oil strainer, and pipe; According to specifications, reinforcements and hybrid parts (metal structure) can be implemented locally
 
Oil filter module JP Currently available Oil filter module in hybrid design (aluminum/plastic)
 
Transmission oil cooler JP Currently available Oil cooler module with integrated thermostatic valve  
Fuel filter   Currently available Full-plastic diesel fuel filter with exchangeable eco-type element and high functional integration
 
Cooling module   Currently available New high performance low temperature radiator 21 mm depth replaces traditional 26 mm low temperature radiators; Low temperature radiator with aluminium tanks to allow minimum package depth. Plastic tanks also possible, when used as module carrier  
Enthalpy Storage Tank   Others At engine start, the patented Enthalpy Storage Tank substitutes the cold coolant in the engine cooling circuit by with the hot coolant from the heat storage tank
 
EGR cooler JP Currently available Exhaust gas cooler in tube-bundle design with plastic housing; Exhaust gas cooler with die casted housing  
Fuel controller for diesel tanks   Reference exhibits Faster warm up of the diesel
 
Condenser   Others The indirect condenser (iCond) replaces the conventional air cooled AC condenser; The heat of the iCond is rejected to the ambient indirectly via the low temperature radiator
 
Compressor JP Currently available MAHLE Mini Variable Displacement Compressor (MVC) offers continuously variable operation over a wide range of operating conditions; The MAHLE variable mechanism is proven to be robust
 
HVAC module   Currently available MAHLE’s modular concept (for front HVAC module) is suitable for a wide range of vehicles and comfort requirements up to full 4-zone air conditioning; The MAHLE common rear HVAC is specifically designed to accommodate large SUV or minivan vehicle platforms.  
Fragrance diffuser system JP Currently available Personalized and high quality scenting of the cabin air; The cartridge contains a solid carrier for the liquid fragrance oil which is released by a controlled airstream; The integrated blower and intelligently controlled doors create a pulsed fragrance discharge
 
Climate Control Unit   Currently available The climate control unit enables a fully automatic and intuitive air conditioning for 4 separate climate zones. It allows an individual control of the climate for the driver and each passenger.  
PTC heater   Currently available Best-in-market heat up performance for pure and plug-in hybrid electric vehicles; Integration into HVAC module requires less packaging space
 
Battery cooling plate   Currently available The battery cooling plate ensures a temperature < 45 °C inside the battery cells; at moderate ambient temperatures, the coolant is supplied via the low temperature radiator, at high ambient temperatures via the chiller in the AC-loop  
Battery chiller   Currently available Lithium-ion batteries require cooling to reach a long lifetime; The compact chiller is a stacked plate heat exchanger which evaporates refrigerant and thus cools down coolant below ambient temperature; this coolant flows through a cooling plate inside the battery removing heat from the battery cells  
EPS motor   Currently available Very compact solution providing uniquely low cogging torque
 
Electric ABS motor   Currently available Compact design
 
ESC motor   Currently available Compact design  
High voltage traction motor for electric vehicles   Currently available High motor efficiency: 96 %  
Thermostat   Currently available Map-Controlled Thermostat with Coolant Standstill Function  
Charge air cooler   Currently available Coolant cooled charged air cooler; Plastic inlet and outlet tanks; Tanks crimped to core
 

Goodyear Japan Ltd.

Booth No.E5108

Exhibit Name WP / JP Category New Function / Feature Photo
BH-03 JP Reference exhibits Reference model
Electricity-generating tire
BH-03
BH-03 electricity-generating tire presents a novel idea of tire generating electricity itself. The tire can generate electricity through converting the pressure on the tire, deformation and the heat produced on the tire into electricity, which can be supplied to the battery on hybrid or electric vehicles and other electronic devices. This new concept is our proposal for the future mobility in anticipation of the increasing number of hybrid cars, popularization of electric vehicles and ultimately the automated driving of vehicles.
Note: This product is conceptual and not scheduled to be launched onto the market yet.
Triple Tube JP Reference exhibits Reference model
Morphing tire
TripleTube
TripleTube morphing tire presents a novel concept of tire transforming its own shape according to the condition of road surfaces.
The tire provides optimal performance and various functions for drivers according to the road surface conditions. The air pressure of the three embedded air chambers (tubes) can be adjusted indivisually to change the shape of the tire.
① Eco/safety position
② Sporty/cornering position
③ Wet safety position
Sustainable material is used for the compound in the aim of environmental conservation.
Note: This product is conceptual and not scheduled to be launched onto the market yet.

The Yokohama Rubber Co., Ltd.

Booth No.E5109

Exhibit Name WP / JP Category New Function / Feature Photo
New brand tire (tentative name) WP Currently available New brand tire will be released soon.  

TS Tech Co., Ltd.

Booth No.E5110

Exhibit Name WP / JP Category New Function / Feature Photo
A Seat that Senses a Passenger's Emotions (Ambient Seat) WP Reference exhibits If car seats could sense the emotions of their passengers and change the interior of the car to reflect those emotions, maybe people would like car seats even more...
This idea was born from Za Lab, a group of acute, young employees from our company who research seating. The seat measures brainwaves while individuals are relaxing or communicating with other passengers and changes color accordingly. We invite you to visit our booth and experience the future of seating.
zecOO Custom Seat WP Reference exhibits We bring the future one step closer through a collaboration with the electric motorcycle zecOO, created by designer Kota Nezu. We have added a mechanism that interlocks with the accelerator to gradually raise the back of the seat up. The seat even fully supports the driver's upper body during the rapid acceleration unique to the motorcycle's motor. Come and see its refined design and cutting-edge features.
Aibou Seat Ver. 2 WP Reference exhibits The Aibou Seat (Buddy Seat) we exhibited in 2013 focused on a passenger's physical characteristics, making automatic adjustments to create his or her ideal driving position. However, this version shifts its focus to the inside of a passenger's body by featuring technology that senses biological information in order to monitor daily health information.
The basic concept is that muscular imbalance or deterioration results in poor posture. This is thought to be the cause of stiff shoulders and hip pain.
With an even greater focus on ideal posture, we are working to evolve the Aibou Seat so that it will tone antigravity muscles to create a healthy body.
[New Idea] Rear Seat "Escort Package" WP Reference exhibits This package delivers unprecedented hospitality technology to passengers from the time they enter the vehicle to the time they exit through its seats and door trim.
Dedicated Honda Civic Type-R Seat   Currently available The perfect seat to support the fastest front wheel drive at Nurburgring. The use of a thin cushion pad to create a low driving position eliminates the need to alter the floor or seat frame. Be sure to try out the seat that lets you experience the joy of driving in situations ranging from everyday use to race time through its unmatched secure fit.
Cutting-edge Sports Seat for the Honda Access Honda Fit WP Reference exhibits We have further improved the seat's performance, enabling it to deliver a more secure fit and improved texture while still maintaining the safety and comfort of the original seat.
Volkswagen Golf Touran 3rd Row Seat   Currently available Our seat technology has been recognized by European automakers. Passengers can create completely flat luggage space with one hand, even with the headrests still attached to the seat.
We have successfully made the seat surface even thinner by using even more surface elastic. The seats create an interior that takes both a spacious trunk and comfort to the next level.

TONE Co., Ltd.

Booth No.E5112

Exhibit Name WP / JP Category New Function / Feature Photo
"Next Generation Tool Series" are the best designed hand tools in our history.   Others We designed new model ratchet handles and spanners as TONE Next Generation Tool Series .
TONE Next Generation Tool Series won Good Design Award in 2014.
The tools are very tough,easy to use and well designed.
HAND TOOLS   Others We have many high quality hand tools, bolt tightening and loosening equipment, and torque control equipment, Our brand TONE are familiar to customers as high reliability & long history brand in the tool field. We also have many tool set options to satisfied with customer's demands.
TOOL CASE   Others
TORQUE WRENCH   Others Less trouble. No battery. Less misread torque. All torque wrenches with its calibration certificates
Many torque range options .
DIGITORQON TDT-SERIES   Others Digitorqon TDT-Series are easy to control torque & have 9 types torque range from 6N・m to 850N・m.
Reliable torque control in many fields such as an assembly work in a factory, car maintenance, industrial equipment etc.
Check tightening & loosening torque with peak mode(show up only maximum torque in a work) or track mode(show up real-time torque). LCD display, beep sound and LED light alerting when reaching the target torque.
Able to save & redisplay 250 torque control work result & transfer the data to PC.
STAINLESS TOOL   Others 100% high quality stainless tool. Rust resistance.
AIR TOOL   Others Many kinds of air tool for lots situations. For maintenance of motor-bikes & cars etc.
New models are coming up.
  Others TONE SALE in 2016 are from November 1st in 2015 to April 30th in 2016.
Unique & cool tool case for your work place.
Many tool sets & cases on sales
 

Tohnichi Mfg. Co., Ltd.

Booth No.E5113

Exhibit Name WP / JP Category New Function / Feature Photo
Torque Wrench   Others Basic torque wrench used to tighten bolts.
A clear click sound by internal toggle mechanism signals tightening completion upon reaching the set torque.
Torque Screwdriver   Others RTD is designed to ratchet freely after reaching the set torque to prevent applying over-torque.
Toggle clutch torque detection mechanism for enhanced durability.
Direct Reading Torque Wrench/Inspection   Others Improved visibility with the dual displays of LCD and LED.
LCD screen is viewable under the direct light, while LED screen is vivid in dark place.
Saved date can be output througt USB cable.
Power Torque Wrench   Others Conventional two-step tightening of impact + torque wrench can be executed with one wrench, which greatly improves work efficiency.
Provisional tightening is processed with the air motor operation, and completed in high accuracy by manual torque wrench work.
Torque Wrench Tester   Others Pole plate is equipped for all models, which helps horizonal setting of torque wrenches.
Deta memory capacity up to 99 readings. Sample quantity, maximum value (Hi), minimum value (Lo) and mean value can be displayed.

Clarion Co., Ltd.

Booth No.E5114

Exhibit Name WP / JP Category New Function / Feature Photo
  Currently available

Continental Automotive Corp.

Booth No.E5203

Exhibit Name WP / JP Category New Function / Feature Photo
Electrical Wastegate Actuator   Reference exhibits  
Electrical Compressor Bypass Valve   Reference exhibits  
Turbocharger for Gasoline Engines Water-Cooled Aluminum   Reference exhibits  
Exhaust Control Valve Linear   Reference exhibits  
ECU Gasoline Solenoid Direct Injection   Reference exhibits  
Gasoline DI XL5 Solenoid Injector   Reference exhibits  
Gasoline High Pressure Pump GHP 2.5   Reference exhibits  
Diesel High Pressure Pump DHP 1.1   Reference exhibits  
ECU PCRs5 Diesel Piezo Common Rail   Reference exhibits  
Diesel Common Rail Injector PCRs5   Reference exhibits  
Electrostatic Particulate Matter Sensor   Reference exhibits  
In Cylinder Pressure Sensor (ICPS)   Reference exhibits  
Ultrasonic Fuel Level Sensor   Reference exhibits  
Fuel Delivery Module NG2   Reference exhibits  
Compact SCR EHC System   Reference exhibits  
Tank-Integrated Extraction and Pump Unit "Gen IV"   Reference exhibits  
Temperature Sensor - High Multiple   Reference exhibits  
Water-Cooled SCR Injector   Reference exhibits  
HV E-Drive with Inverter   Reference exhibits  
48 Volt BSG   Reference exhibits  
Double Clutch Transmission (DL382)   Reference exhibits  
Double Clutch Transmission (DQ400)   Reference exhibits  
Electrical Water Pump   Reference exhibits  
Brushless DC Drives High Effiency   Reference exhibits  
Twin Drive Pump   Reference exhibits  
Connected Energy Manager   Reference exhibits  
Basic Unit " Pixel Light Demonstrator"   Reference exhibits  
Body & Security Samples + Heart of Body Integration   Reference exhibits  
Integrated Meter / Head-up Display   Reference exhibits  
Display Solutions: Hybrid Cluster   Reference exhibits  
Display Solutions: Haptic Feedback Display   Reference exhibits  
Smart Telematics   Reference exhibits  
Connected Technician (AR Engine)   Reference exhibits  
Mono Camera (MFC400)   Reference exhibits  
Stereo Camera (MFS430)   Reference exhibits  
Long Range Radar (ARS410)   Reference exhibits  
Surround View (Cameras)   Reference exhibits  
Short Range Radar (SSR320)   Reference exhibits  
Wheel Speed Sensor   Reference exhibits  
Chassis Position Sensor (CPS)   Reference exhibits  
Chassis Domain Control Unit (CDCU)   Reference exhibits  
Safety Domain Control Unit (SDCU) SPEED XL   Reference exhibits  
C2X Application Unit with M2XPro   Reference exhibits  
MK 100   Reference exhibits  
MK C1   Reference exhibits  
EPS-Si   Reference exhibits  
New Fist Type Caliper   Reference exhibits  
Active Engine Mount   Reference exhibits  
Taraxa Rubber Tire (WinterContact TS 850 P SUV)   Reference exhibits  
Sport Contact 6   Reference exhibits  
ContiVikingContact 6   Reference exhibits  
Conti.eContact (with ContiSilent)   Reference exhibits  
ContiTech seat   Reference exhibits  

Robert Bosch GmbH

Booth No.E5204

Exhibit Name WP / JP Category New Function / Feature Photo
Automated mobility JP Reference exhibits Innovative driver assistance systems, partially and highly automated functions for more safety and comfort.
Sensors and components that are essential to realize the fully automated driving in the future will be introduced (or presented) in a model car as a total system.
 
Diesel Engine Management system JP Reference exhibits Piezo injectors with its increased injection pressure up to 2,700 bar, “Needle Closing Control” realizing improved injection accuracy, and “Digital Rate Shaping” to control combustion rate through a multi stage fuel injection. These new technologies result to significant reduction on combustion noise and fuel consumption.
Bosch’s diesel management system including from engine combustion to exhaust gas treatment is designed to meet more stringent emissions standards in the future. Bosch introduces this overall system with engine model and animations.
 

Mitsuba Corp.

Booth No.E6008

Exhibit Name WP / JP Category New Function / Feature Photo
Parallel Link Robot   Reference exhibits The demonstration model of the parallel link robot manufactured by utilizing Mitsuba's servo motor, driver, image recognition, and other various control technologies.
Compared to normal single arm robots, the parallel link robot is lightweight and features the high speed operation.
At Mitsuba, we utilize the lightweight features of the robot to aid in producing rear wiper motors integrating our very own idea in making equipment to carry the robot for maximizing the robot’s wide-range movements.
 
Variable Curvature Mirror   Reference exhibits  
Turnsignal Relay for LED   Currently available  
Electric Oil Pump   Currently available The world's first ECU-integrated electric oil pump in the 100W class.
Our pump offers high versatility for a wide range of applications.
We also believe that our product can contribute to the improvement of fuel economy by controlling the hydraulic pressure on demand.
 
Power Slide Door System (4th Gen.)   Currently available The world's lightest PSD drive unit with improved layout flexibility on vehicle, safety and lower power consumption using technologies for lightweight and thin motor design, sensitive braking control and high efficiency.
 
SR Motor and Driver   Currently available SR motor does not use any magnets.
Its design structure is very simple and sturdy. Therefore, it is suitable for usages requiring high motor rotations.
Furthermore, this motor has low friction torque, which enables inertial rotations.
In high-speed driving with high motor rotations, a driver will be thrilled by dynamic sounds.
 
Reversing Wiper (Combined ECU)   Currently available  
Brushless Motor for Cooling Fan   Reference exhibits  
Electric Power Steering Motor   Currently available  
Electric Servo Brake Motor   Currently available  
Power Window Motor (Combined ECU)   Reference exhibits  
Sunroof Motor (Combined ECU)   Currently available  
Power Seat Motor (Reclining)   Currently available  
Power Seat Motor (Slide)   Currently available  

Car Mate Mfg. Co., Ltd.

Booth No.E6010

Exhibit Name WP / JP Category New Function / Feature Photo
Smart Roof Base Rack System WP Reference exhibits An exhibiting base rack system has 2 types of integrated sensors to help the user to visualize the hook fitting strength and load weight from a smartphone. Smart safety system for base rack.

Background: To decrease user’s worry about whether carrier is set securely or not. App visualizes fitting condition by gathering sensor data. This system is currently planned to be used for driving tests. In the future, gathered test data will be utilized for design criteria.

New technology:
1) Load sensor for detecting carrier base weight which is visualized in the App. It alerts on under/over load.
2) Torque sensor for detecting screw torque on hook of carrier base. App alerts if the screw is not properly torqued.
Smart Carbon Roof Box WP Reference exhibits Imagine a roof box that can be opened or closed remotely by a smartphone App. When the box closes, it locks automatically with no further user action needed. The roof box has an independent power supply, equipped with solar panel and battery. It can also be controlled by a smart watch.

Background: In case of a high roof car, it is convenient and safer with an open/close and automatic lock feature. A smart roof box control system.

New technology:
1) Lock sensor detects the roof box is closed and locks automatically
2) Using Bluetooth control, the user can open/close the roof box and monitor the lock status
3) Integrated solar panel is able to charge the battery in three days
Smart Baby Cushion WP Reference exhibits A baby’s condition while sitting in a car child seat is a common concern for a driver.
The inner cushion gathers data from various sensors such as temperature, humidity and motion to analyze, display and audibly notify the driver which helps support safe driving.
Background: A parent is concerned about their baby in the rear child seat. This cushion will inform the driver of any change in the baby’s comfort such as restlessness, sweat or moisture.
New technology:
1) Temperature and humidity sensors to analyze the child’s condition.
2) Pressure sensors for detecting baby movement.
Smart Sunshade WP Reference exhibits Motorized sunshade integrated into a child car seat. It can be opened or closed by a smartphone App. Alleviates concerns about baby in direct sunlight. Sunshade can be controlled remotely by smartphone or smart watch. Exhibited smart sunshade is equipped with a luminance sensor and automatically positions the sunshade by sensing direction or strength of sunlight.

Background: When you are worried about direct or excess of sunlight, the sunshade can be remotely opened or closed while not disturbing a sleeping baby.

New technology:
1) Bluetooth Remote control
2) Preventing direct sunlight to the baby face Luminance sensor used to control sunshade position (open/close)
TouchStart Router BT2 Remote Car Starter Smart Watch Model WP Reference exhibits new remote car starter can be operated by a smartphone App. This remote controller acts like a router between the installed onboard unit and the smartphone. Interior air temperature of car, remaining battery and other information can be monitored by the App. The exhibiting model can also be controlled with a Smart watch.

Background: If the weather is hot, you can cool down the temperature inside your car by using the remote car starter. In cold weather conditions, you can warm to melt a frozen windshield. A remote car starter has been popular in snowfall areas and now even more convenient with smartphone control.

New technology: Smart watch support added. (Exhibiting model)
Visualized Things App WP Reference exhibits This App is equipped with a new safety mechanism for drivers.

While driving, we wanted another eye to see if a roof carrier is firmly attached or to monitor a baby in the rear seat, or any similar application. A variety of car accessories incorporating these sensors can transmit this visual information to a smart device. This exhibit visualizes this concept with the exhibiting roof box, roof carrier, child car seat and engine starter combined into one App.
Handy Car Mount WP Others This smartphone car mount is not just a mount. When you set the phone to mount it automatically holds and slides in a charge plug in a single action.
(Exhibiting model customized to open/close only.)

Background: When you get into the car, it holds and charges a smartphone effortlessly.

New technology: New design features a mechanism that holds and inserts charger just a single motion.
AILEBEBE KURUTTO 3i   Currently available A revolving type child car seat can be installed easily using ISOFIX fittings equipped to a vehicle. It can prevent misuse or improper installation without using car seat belts. This child seat can be rotated 360 degrees with one hand which allows you to easily position the baby.
The newest model of this popular child car seat now comes equipped with a large sunshade.

Background: In about half the cases, infant seat has misuse. To eliminate misuse of a child seat, we adopt the ISOFIX fitting feature.
Self-winding  Non-metallic Tire Chain WP Others “Biathlon” is the Best-selling non-metallic tire chain in Japan.
We're proud to announce the new “Biathlon” tire chain model. It’s more comfortable than ever.
Integrating a self-winding mechanism, it is easier and safer for even those who have never used a tire chain before.
While keeping the same durability and anti-slip performance it also improves driving comfort and installation simplicity.
A new concept of tire chain installation provides simplicity and driving comfort.
Safe water ashtray WP Others A new concept ashtray is designed to snuff out a cigarette safely and easily. Water is pumped up to the snuff-out unit by use of the ashtray knob. By placing in the tip of the cigarette it easily can snuff out and prevent any smoldering with a small amount of water. This new design prevents creating a foul smelling cigarette puddle in the ashtray. Ashtray can snuff out 4 boxes of cigarettes with one fill.

Toyota Boshoku Corp.

Booth No.E6207

Exhibit Name WP / JP Category New Function / Feature Photo
Luxury Concept Seat   Reference exhibits The luxury concept seat for the ultimate in comfort and a premium interior space.  
Washable Cover Seat   Currently available Automobile seat cover which can be removed for washing. Keep your car interior clean and stylish.  
Newly developed All-new Prius Seat   Currently available A new type of seat for the Prius with improved comfort using a newly developed seat frame based on the Toyota New Global Architecture concept. (Structural reform of car manufacturing by Toyota Motor Corporation with the aim of achieving dramatic improvements in the basic performance and product strength of its cars.)  
Stack Manifolds   Currently available This manifold supplies hydrogen, air and coolant to the fuel cell. Use of insert-molded resin components on large aluminum sections contributes to greater thinness.  
Unison Ring   Currently available Unison ring functional part for diesel engine turbochargers. Contributes to miniaturization of the turbo charger through unique precision press technology.  

ZF Friedrichshafen AG

Booth No.SMC01

Exhibit Name WP / JP Category New Function / Feature Photo
SMALL MOBILITY PIANA WP Reference exhibits This is new concept small mobility call “PIANA” provide the happiness and driving pleasure for all owners in accordance with lifestyle.

- PIANA entrane door will be the roof prevent from the rain.
-Using outdoor emergency electric power source(100V~220V)
-Connecting with your smart phone to check vehicle conditions also using NAVI system and communicating with all other friends in PIANA unit.
-Choose the color and body shape to make your only one.
-Hybrid power from Lithium battery and A Magnesium-Air Fuel Cell (MAFC).
-Provide option like Roof rack, Room light torch, Outdoor tent, Tarp and Chair.
-Considering 4WD version and more power full motor including.
Multi-Support Mobility WP Reference exhibits Multi-Support Mobility

This “Versatile Work Support EV” is for all industrials like Forestry, Farming and Fishery to support hard labor of female workers also aging workers.

-Easy control like using your hands.
-Remote control system keeping you safe when need to work on dangerous areas.
-Many options that you can choose arm end.
-For example of fatigue duty:
Harvesting machine.
Grass cutter.
Snowplow.
Mountain climbing.

Exedy Corp.

Booth No.SMC02

Exhibit Name WP / JP Category New Function / Feature Photo
WHILL Model A   Currently available “ I’ve even given up on going to the grocery store two blocks away. ” She did not want to be seen in public as a wheelchair user. She disliked the negative perceptions associated with wheelchairs; that he must be ill or weak. We realized that many people desired this kind of innovation in the mobility industry. Our mission is to make technology that is minimalistic, functional and stylish. We intend to fundamentally change the attitudes of personal mobility users, as well as the general perceptions of personal mobility.  

Exedy Corp.

Booth No.SMC03

Exhibit Name WP / JP Category New Function / Feature Photo
Ultra Lightweight Vehicle eXmachina CONCEPT   Reference exhibits

Exedy Corp.

Booth No.SMC05

Exhibit Name WP / JP Category New Function / Feature Photo
ZieD - C1 WP Others Smallest and lightest Electric Vehicle for 2 persons.
Feature 1. Brake Assist for Hill start
2. Automatic parking brake System
3. Front suspension : Double wishbone
4. Rear suspension : Multi link
5. Turning radius : 2.5(m) or less
6. Maximum speed : 25km/h or less
7. Riding capacity : 2 persons
 

Exedy Corp.

Booth No.SMC07

Exhibit Name WP / JP Category New Function / Feature Photo
Ninebot One WP Currently available Ninebot One is an intelligent and fashionable personal transportation tool with interactive function. With your exclusive transporter Ninebot
one, you can say goodbye to the crowds and enjoy the freedom and pleasure, being the master of the world.
Ninebot E WP Currently available Amazing transportation
Ninebot is an amazing transportation tool. You drive and control it with your body's balance, just lean forward and backward. The Ninebot senses the rider's posture and remains balanced. In addition, you can connect it to your smartphone via Bluetooth; enjoy remote control and intelligent diagnosis of any issues. The Ninebot-E, with no operation bar, weighs only 23.5Kg and can be equipped with a 670Wh high capacity battery, which extends its mileage capability to 30-45Km.
Ninebot MIni WP Reference exhibits
Ninebot Nino WP Reference exhibits

Kyowa Kogyo Co., Ltd.

Booth No.SMC10

Exhibit Name WP / JP Category New Function / Feature Photo
  Others  

Yorozu Corp.

Booth No.SMC11

Exhibit Name WP / JP Category New Function / Feature Photo
Mazda CX-5   Currently available  

NHK Spring Co., Ltd.

Booth No.SMC12

Exhibit Name WP / JP Category New Function / Feature Photo
tentative name : New FCV WP Currently available Honda original technologies made this vehicle the world's first production model of a FCV sedan with the entire fuel-cell powertrain consolidated under the hood of a sedan-type vehicle.
This powertrain layout enabled a full cabin package that seats five adults comfortably. Moreover, the all-new FCV features a cruising range of more than 700 km and exhilarating driving made possible by the high-output motors. Furthermore, when combined with an external power feeding inverter, this FCV can function as a “mobile power plant” that generates and provides electricity to the community in the case of an emergency.
 
Honda MBEV (Mobile Battery EV) Concept WP Reference exhibits Honda MBEV Concept is a two-seater Micro-EV powered by detachable mobile battery pack, which is suitable for short-distance travel. A number of battery pack on demand and a battery-swap system, in addition to normal charging, can resolve a complaint to AER(All Electric Range) and charging time. For world-wide customers, a pipe frame is adopted for easy repairs, and a large-capacity utility space is secured with two adults seated next to each other. In addition, wide versatility from commuting to recreation will be realized by customization using parts and accessories.  
Smart Hydrogen Station mock-up   Others This Smart Hydrogen Station adopts Honda's original high-differential-pressure electrolyzer which does not require a compressor and houses the key components such as the high-pressure hydrogen tank and a fueling nozzle in a package for the first time in the world.

Simple
With the simple package design, the installation time is drastically shortened after shipment from the factory.

Small
With the compact package design, the space needed for installation is reduced dramatically.

Sustainable
Hydrogen is produced using electricity generated from the residual heat of waste incineration. In the near future, the use of hydrogen stations can be expanded by utilizing the various energies particular to each region for local consumption.
 
Power Exporter 9000   Currently available Easily connect to an FCV with an external power function to provide electricity in times of disaster, power outtages and emergencies.
Supplies electricity for other activities such as outdoor camping.
Quiet, compact and clean with zero CO2 emissions.
With a maximum output of 9kW, the Power Exporter can utilize the high capacity onboard fuel cell stack to provide electricity for large facilities such as refugee shelters.
Designed with enhanced versatility in mind, the unit is interchangeable with other manufacturer models.
 
Honda Power Manager   Currently available  

NSK Ltd.

Booth No.SMC16

Exhibit Name WP / JP Category New Function / Feature Photo
  Others
  Others

NSK Ltd.

Booth No.SMC17

Exhibit Name WP / JP Category New Function / Feature Photo
Hydrogen dispenser WP Currently available ・To active the miniaturization by including the compact heat exchanger
Volume ratio -50%(Comparison with the conventional products)
・The smart design by adopting the round shutter and the glass top
・The filling in both sides of dispenser is available
MULTI face ( Gasoline despenser ) WP Others Upgraded model with c\vorious new functions
・Upsizing dusplay unit
・Band-new design
・Status display lamp of dispenser
・Nozzl hook is easy to store and hose is easy and flexble to fandle
・ECO mode:Power saving mode
・Erroneus fueing prevetion functionality (oil type indication )
 

NSK Ltd.

Booth No.SMC22

Exhibit Name WP / JP Category New Function / Feature Photo
New conceptual mockup of “In-Vehicle Context Awareness”   Reference exhibits Visitors will enjoy a simulated driving experience of a connected car in an advanced in-vehicle environment. This kind of vehicle adopting read-ahead techniques understands (anticipates) and provides, at the most optimal timing, information that drivers need in the midst of the constantly changing circumstances they encounter while driving.  
Automated driving related technologies under development, such as 3D-LiDAR   Reference exhibits We will present the advanced automated driving-related technologies that Pioneer is developing or creating, such as 3D-LiDAR, a driving space sensor that is spotlighted as a key device for realizing automated driving, high-precision
location technologies, and a system for improving and operating advanced maps efficiently (“data ecosystem”).
 
AR HUD (Head-up Display)   Reference exhibits In 2012, Pioneer released the world’s first AR HUD (head-up display) unit that displays AR information on the windshield. This year, visitors will experience a newly developed AR HUD solution with further improvements.  
Telematics service utilizing a cloud platform for automobiles   Reference exhibits We will present the Vehicle Assist, a telematics service for commercial vehicles utilizing Pioneer’s Mobile Telematics Center, a cloud platform for vehicles, and the Car Beacon Service Platform, a telematics solution utilizing a beacon terminal for automobiles.  
OLED lightings   Reference exhibits We will propose a variety of applications that draw upon the features of OLED lighting for vehicles, namely its surface light emitting, thin and light profile, and flexible uses.  
See-through projection   Reference exhibits We will present an information board incorporating a transparent display that enables users to see through the background.  
PAGE TOP