Parts, Machinery and Tools (West Halls)

• 

  WP:World premiere

  Product exhibited for the first time in the world at the Tokyo Motor Show

• 

  JP:Japan premiere

  Product that has arleady premiered abroad, but being exhibited for the first time in Japan at the Tokyo Motor Show

Exhibit Name	WP / JP	Category	New Function / Feature	Photo
Intake Module (for Automobiles)		Currently available	An intake module which is an integration of i) electronically controlled throttle body, ii) resinous intake manifold, and iii) peripheral device.
Electronically Controlled Throttle Body (Lightweight)		Currently available	A lightweight throttle body capable of optimizing the output control of a gasoline vehicle by electronic controlling of opening and closing operations of the throttle valve.
Electronically Controlled Intake Valve for Diesel Engine		Currently available	An intake-air throttle valve using an electronically controlled throttle technology for gasoline engine is used for meeting the emission regulation of diesel engine. (Not only ON-OFF control by the conventional technology using a negative pressure, this electronically controlled throttle technology has accomplished an accurate controlling to an arbitrary open level.
Active Pedal		Currently available	Suppressing (for improving fuel economy) of an excessive fuel consumption attributable to over-pedaling of the accelerator pedal at the time of start and acceleration, as well as maintaining (for safety) of the vehicle-to-vehicle distance relative to the vehicle ahead is a must. To meet the above, this pedal force controller, by dint of a reactive force, transmits, to the driver, a proper opening level of the accelerator pedal.
Variable Valve Timing System (for automobile)		Currently available	An oil-pressure actuator and a small oil control valve control the valve timing in the following sequence: i) shifting the phase of the cam shaft, and ii) thereby, causing a phase difference between the cam shaft and the crank shaft.
Coolant Control Valve (CCV)		Currently available	Using a single body for properly controlling a plurality of coolant flow paths in engine can accomplish i) early warming, ii) improving of combustion, iii) reducing of friction and iv) reducing of coolant loss, thus leading to a) improving of fuel economy (2% to 3%) and b) reducing of emission.
EGR Cooler (made from aluminum diecast)		Reference exhibits	A lightweight cooler doing the following sequence: i) lowering the temperature of a high-temperature emission to thereby enhance concentration of the emission, and ii) thereby, enhancing EGR system's operations (reducing loss of power of an engine, and preventing knocking of the engine).
Electronically Controlled Exhaust Valve		Currently available	A throttle valve using an electronically controlled throttle technology is used for controlling exhaust gas pressure and exhaust gas heat of each of diesel engine and gasoline engine. (Not only ON-OFF control by the conventional technology using a negative pressure, this electronically controlled throttle technology has accomplished an accurate controlling to an arbitrary open level.
Vacuum Pump		Currently available	A unit for supplying a negative pressure by receiving a dynamic power from engine.
Electric Vacuum Pump		Currently available	In an environment where EV or HEV is unable to secure a negative pressure of engine, electrically driving the electric vacuum pump when necessary and to such an extent as necessary can supply a negative pressure to the brake vacuum doubler, thus assisting a pedal force of the brake.
Electric Oil Pump		Currently available	A trochoid oil pump driven by a brushless DC motor (driver integrated)
Electronically Controlled Throttle Body for Motorcycles		Currently available	A throttle body making it possible to control engine output and idling by electronically controlling the throttle valve.
Variable Valve Timing System (for Motorcycles)		Currently available	A small oil-pressure actuator and a small oil control valve which are oriented to motorcycles control the valve timing in the following sequence: i) shifting the phase of the cam shaft, and ii) thereby, causing a phase difference between the cam shaft and the crank shaft.
Throttle Body for Motorcycles		Currently available	A throttle body equipped with i) a main throttle valve directly connected with a throttle grip, and ii) a sub-throttle valve controlled by ECU.ECU analyzes engine status and driver's will, to thereby control the air flowrate to be supplied. This has accomplished a response which is linear and natural.
Throttle Body for Small Motorcycles		Currently available	A next-generation throttle body for single cylinder. Bore diameter, in a range of 22 mm to 28 mm, made into a platform has commonalized component parts, machining and assembling. This has accomplished miniaturization, lightweight and reduced cost.
Fuel Pump Unit for Motorcycle (FI system)		Reference exhibits	An in-line pump having a unified fuel pump and injector on intake manifold.
Controller for Motorcycle (FI system)		Reference exhibits	A card-edged controller for a small FI system.
Solenoid for Variable Valve System (VVA)		Currently available	A special actuator for controlling Variable Valve Actuation (VVA) of small motorcycles.
Intake Module for PWC		Currently available	An intake module which is an integration of the following parts for PWC (personal water craft): i) electronically controlled throttle body, ii) resinous intake manifold, and iii) resinous delivery pipe.

Exhibit Name	WP / JP	Category	New Function / Feature	Photo
Plastic Fuel Tank		Reference exhibits	We will display a fuel tank with minimized slosh noise technology, which also has thin wall structure to the limit compared to our past technology. The fuel tank is a low cost, short in development, fuel efficient, kinematic in performance, reduced in environmental impact, and the vehicle can achieve a quiet cabin.
Panoramic sunroof		Currently available	From the variation of sunroof that we have, we will display the thin, light weight comfortable open feeling panoramic sunroof. We promise that for the customers equipped with this panoramic sunroof will be satisfied with an excitement of openness.
Rear engine carbon hood		Reference exhibits	With the compiled technology that we have acquired from the production of wheel chair racer, we will display Honda S660 mounted with the beyond imagination light weight and strong rear engine carbon hood.
Special purpose vehicle		Reference exhibits	We will display Honda S660 with a original unique customization, which others can no imitate. The car will be wrapped in orange, which is Yachiyo's image color, also with the interior designed in orange. The vehicle will also be mounted with rear engine carbon hood. Based on the technological expertixe of producing the minimum volume models such as S660, we will also help boost customers idea become real and characterize in the field of special purpose vehicles.
Automotive High-pressure tank		Reference exhibits	With the technology and know how that we have inherited from plastic fuel tank, we aim to become a storage container manufacturer for variety of energy sources. Currently we have started selling LPG container in Southeast Asia. For the automotive market we have finished developing CNG tanks, which will be displayed at our booth. For future target we will use these techonologies to develop tanks for hydrogen fuel cell vehicles.

Exhibit Name	WP / JP	Category	New Function / Feature	Photo
3D NET-SEAT「1 inch project / Jim special」		Reference exhibits
Recliner D2000 series		Reference exhibits
AD2 SLIDER		Currently available
Smart I heating		Currently available
		Reference exhibits

Exhibit Name	WP / JP	Category	New Function / Feature	Photo
Concept X-2　(concept seat)		Reference exhibits	Concept X-2 is a newly developed concept seat that is optimized for supporting the human body. We have pursued minimized seating area with high-strength/slim seat structure based on a new frame.

Exhibit Name	WP / JP	Category	New Function / Feature	Photo
MonoLED* unit		Currently available
Adaptive Driving Beam Matrix beam		Reference exhibits
Camera Monitor System		Reference exhibits

Exhibit Name	WP / JP	Category	New Function / Feature	Photo
RAYS World Endurance Championship Center Lock Racing Wheel		Reference exhibits	RAYS is the official partner and supplier of magnesium forged wheels for TOYOTA TS040 HYBRID which races in the worlds top category of endurance racing WEC (World Endurance Championship), challenging together for the win. Technology used and accumulated in this category is fed back into each and every aluminum wheel RAYS produces for the consumer market.
RAYS SUPER GT Center Lock Racing Wheel		Reference exhibits	RAYS supplies aluminum forged wheels to Japan's top category racing Super-GT.
VOLK RACING G50		Currently available	The G series pursuit is always to express dynamism in the technology of forging. The G50 is a 5 spoke with delicate lines that creates a sense of movement to blend into the latest car body mass. It is delicate yet dynamic.
Gram Lights 57Transcend		Currently available	The 57Transcend embodies the new challenge of RAYS CAST Wheel. Review of the traditional spoke's cross section were redefined and through careful analysis created a new Delta Section Spoke which has a new cross-sectional triangular shape. This allows for higher level of both strength and lightness.

Exhibit Name	WP / JP	Category	New Function / Feature	Photo
CRANK SHAFT		Others	We are Crankshaft processing manufacturer that boasts the top market share in japan. We can accommodate everything from small-lots to mass production. We propose a global crankshaft solution that enables us to accommodate any need from anywhere in the world. With the technology and know-how Yuasa has accumulated and refined for over 60 years, We are able to meet the diverse needs of customers.

Exhibit Name	WP / JP	Category	New Function / Feature	Photo
NUT,BOLT		Others

Exhibit Name	WP / JP	Category	New Function / Feature	Photo
Prototype castings of Turbocharger ultilizing 3D printing technology		Others

Exhibit Name	WP / JP	Category	New Function / Feature	Photo
nepros　20th.anniversary model ratchet handle		Currently available